See the Chapter 7 in the Instruction Manual. You can do it when you fell the CR movement is not smooth. Select the Nozzle Cleaning menu below when you just want to check the situation.Įxecute this menu when you clean and grease up the CR Guide Shaft. This is simply because the GT-3 refreshes the timer to tell you the next timing of exchange. Wiper Cleaner, Flushing Felt and Sponge, Exhaust Fan Filter and Roller Felts. Select this menu when you actually exchange the Maintenance Parts, e.g. White Ink cannot be loaded alone in an empty dry tube, or so many air bubbles appear in the ink and you cannot print properly with many missing nozzles. When you execute Initial Cleaning for White, prepare Maintenance Cartridge W and the bottle filled with Maintenance Solution. A little confusing if you are a GT-782 user. You can use this menu to load White Ink when the Maintenance Solution is already filled with the Tubes, after Tube Cleaning. GT-381/GT-361 can retrieve White Ink inside the Tubes only when you select.
You can see icon on the panel when the print data in GT-3 is going to print Uni-Directionally. You can also fix Uni-Directional/Bi-Directional print with this menu.
In GT-3 and also GT-782, you can set Uni-Directional by printer driver when the printer menu is "AUTO". GT-541's Uni-Directional print is only available in one design type (arp file). CompactFlash like GT-541/782, then use some memory card reader. GT-3 can read the AR3 data in USB Flash Drive. You can manage the volume of flushing with the menu below. Go to Shake it! page for further information. Shake the White Ink Cartridges for agitation before you execute this menu. This is the menu to refresh the White Ink inside the Print Heads and the Tubes. The menu and the submenu depend on the model: GT-341 has no menu for white ink.